Should i skate risers

Rectangular pads are standard, they will increase your deck height and decrease the shock felt by the rider. Remember though, the higher your deck is from the ground — the less maneuverable it will be. The wedge shape of angled riser fixes your trucks at an angle from your deck while also raising your deck height. Angled rises can be angled in both directions which means that you can increase or decrease how much your skateboard trucks turn depending on the direction you face your angled riser.

If you want to increase your turn capability, install the angled riser so that the thickest part is closer to the centre of the deck. You can also flip the direction of the angled risers to create special turning dynamics e. You may have noticed that there are 6 holes in skateboard riser pads even though you only need 4 when installing your trucks.

There are 6 holes to accommodate for the two arrangements of old school and new school skateboards. But now manufacturers provide both on their truck sets — and so riser pads have also provided both. What are Skateboard Riser Pads? Skateboard riser pads are used to: Avoid wheel bite when the wheel rubs against the deck on a hard turn Provide more cushioning Change the characteristics of a specific skateboard setup Reduce stress cracks Increase the life of your deck. The riser is placed between the truck and the board.

So, it reduces the stress. The riser pads increase the height of the skateboard. Therefore, few skateboard tricks are going to be difficult to do for skaters. As you know, the riser pads increase the height of the skateboard. Moreover, there are many alternatives to skateboard riser pads. If you are not comfortable with the riser pads, you should go with the other options.

Needless to say, it is a crucial question for every skater. Most experienced skaters use riser pads to prevent wheel bites. There are various kinds and colors of riser pads available in the market. However, you have to choose risers pads depending on your skateboard style to get the best result. Besides, you have to use the accurate size of hardware accommodating the extra height. So, it would be great if you used the hardware accordingly. It is the standard shape and most using riser pad.

Besides, it increases the distance between deck and wheel. As a result, wheel bite possibility decreases. Rectangular riser pads are beneficial for skateboarders and longboarders. However, you should choose one that suits your board and skating style. Angled or wedge riser pads are more beneficial than rectangular risers. It does not only increase the overall height but also provides an angle.

In other words, you can angle your board from the center or towards the center through the angled or wedge risers. This riser pad helps to get a sharp turn during skating. Moreover, you should maintain the riser pads hole and design accordingly to get the maximum result. Putting riser pads on a skateboard is a challenging task for beginners.

Having trouble with corner clearance? Are your wheels digging into the bottom of the deck when you turn? Or, are you just sick of that tingling feeling in your feet when you ride on rough pavement?

Whether you ride a longboard or a skateboard, a simple addition to your setup can solve all those problems and more: riser pads. Riser pads and shock pads may seem like the same thing, but there is actually a subtle difference between the two that means they will affect your ride differently.

Make no mistake, though. Adding either one of them to your setup will have a profound effect on your experience. Their whole purpose is to raise the deck higher, moving it further away from the trucks. Their purpose is to cushion your ride. Riser pads Plastic.

As was mentioned, installing riser pads between the truck baseplate and the board will lift the deck higher. If you are used to riding without them, risers of any size will be noticeable. Much taller, and your board will begin to feel top heavy and unstable. Lifting the board away from the trucks automatically increases the distance from the top of the wheels to the bottom of the deck. Wheel bite prevention. The bottom of the deck gets gradually closer to the tops of the wheels as you lean into a turn.

Lean too far and the wheels can rub on the surface of the deck, acting like brakes. This is called wheel bite. Do not ignore those black marks burned above your wheels.